How much does automatic gate repair cost on average?

Angi's 2026 figures put automatic gate repair at roughly $900 on average, with a typical range of $550 to $1,500. HomeAdvisor puts electric gate repair lower, at $190 to $575. Those are third-party national averages rather than our prices — the spread between them is itself the point, because the failed component drives the number more than anything else.

Why do gate repair quotes vary so much?

Because "gate repair" describes a dozen different jobs. A misaligned photo eye and a failed control board are both gate repairs, and they are separated by an order of magnitude. Wiring, gate weight, and after-hours timing move the number further.

Do gate repair companies charge a diagnostic fee?

Many do. Industry sources describe diagnostic or trip fees of roughly $75 to $150 as standard practice, and some DFW companies publish a trip charge plus a separate diagnosis fee. We do not charge one — our estimate is free, and that is worth checking against any quote you are comparing.

Is it worth repairing an automatic gate?

Usually, yes. Most gate failures are a single component on an otherwise sound system. It stops being worth it when repairs turn into a pattern, when parts for your operator are no longer manufactured, or when the damage is structural rather than mechanical.

What is the most expensive automatic gate repair?

Operator and control-board work sits at the top of the range, and full operator replacement sits above that — Angi puts a complete replacement at $1,200 to $3,800 installed. Structural repairs to the gate itself, like resetting heaved posts, can exceed both.

Can I get a gate repair price over the phone?

You can get a range, not a number. Describe the symptom and most of the time we can narrow it to a likely component before a truck leaves. The actual figure comes after someone has looked at the gate, and nothing gets replaced until you say yes to it.

Automatic Gate Repair Plano › What Automatic Gate Repair Costs

What Automatic Gate Repair Costs

Published averages put gate repair cost anywhere from $190 to $1,500. That spread is not vagueness — it is the answer. Here is what moves the number.

Call {phone}

The published numbers, and who published them

These are third-party national averages, named at the point of use. They are not our prices and they are not a quote — they are the market context you should have before anyone gives you a figure.

Electric gate repair, general range: $190 – $575 — HomeAdvisor
Automatic gate repair, typical range: $550 – $1,500 (avg ~$900) — Angi 2026
Gate opener / operator repair: $130 – $450 — Angi 2026
Full operator replacement, installed: $1,200 – $3,800 — Angi 2026
Sliding gate motor replacement, installed: $210 – $675 — Angi 2026
Keypad replacement: $150 – $700 — Angi 2026

Notice that Angi and HomeAdvisor disagree by a wide margin on the same service. Neither is wrong. They are averaging different mixes of jobs, which is exactly why a national average cannot price your gate.

What actually drives gate repair cost

Four things move the number, and the gate itself is not the biggest of them.

Which component failed

This is the whole ballgame. A photo eye and a control board are both "gate repair" and they are not remotely the same job. Electronics and drive components sit at the top of the range; entry devices and sensors sit near the bottom.

Whether wiring is involved

The part is often the cheap half. Re-running low-voltage wire under a driveway, or replacing a safety loop cut into pavement, is trenching work — and it is why two identical-sounding sensor repairs can land far apart.

Gate weight and type

Heavy iron gates and long slide gates carry heavier hardware, and their operators are larger. The same failure on a light aluminum swing gate and a twenty-foot cantilever slide gate is not the same part.

Access and timing

After-hours and emergency calls carry premiums across this industry — Angi puts that surcharge at roughly $150 to $200. A gate stuck open at 9pm on a Saturday is priced differently from the same repair on a Tuesday morning.

The diagnostic fee question

This is the line item most people do not think to ask about, and in this market it is real money.

Diagnostic and trip fees of roughly $75 to $150 are described as standard practice across the industry, and some DFW gate companies publish a trip charge with a separate diagnosis fee on top of it — sometimes waived if you authorize the repair, sometimes not. It is worth reading that detail on any quote you are comparing, because it changes what a second opinion actually costs you.

We do not charge one. The estimate is free, and it is free whether or not you hire us for the work.

Comparing quotes? Ask each company what the visit costs if you decide not to proceed. Call {phone} with what you have been quoted.

Why the cheapest quote is sometimes the expensive one

There is one pattern in this trade that costs homeowners more than any hourly rate, and it does not show up on the invoice.

A part replaced without the cause found. A new roller on a track that is out of level, or a new arm on a post that has shifted, wears out at the same rate the old one did. You paid for a part and bought back the same failure.
Safety devices bypassed to make the call go quickly. Unplugging a faulted photo eye makes a gate move again in five minutes. It also removes the entrapment protection, and nobody tells you.
A replacement quoted before a repair was diagnosed. If nobody named the failed component, nobody established that replacement was necessary.

Trying to decide whether to fix it at all? That is a separate question with a separate answer.

Frequently asked questions

How much does automatic gate repair cost on average?: Angi's 2026 figures put automatic gate repair at roughly $900 on average, with a typical range of $550 to $1,500. HomeAdvisor puts electric gate repair lower, at $190 to $575. Those are third-party national averages rather than our prices — the spread between them is itself the point, because the failed component drives the number more than anything else.
Why do gate repair quotes vary so much?: Because "gate repair" describes a dozen different jobs. A misaligned photo eye and a failed control board are both gate repairs, and they are separated by an order of magnitude. Wiring, gate weight, and after-hours timing move the number further.
Do gate repair companies charge a diagnostic fee?: Many do. Industry sources describe diagnostic or trip fees of roughly $75 to $150 as standard practice, and some DFW companies publish a trip charge plus a separate diagnosis fee. We do not charge one — our estimate is free, and that is worth checking against any quote you are comparing.
Is it worth repairing an automatic gate?: Usually, yes. Most gate failures are a single component on an otherwise sound system. It stops being worth it when repairs turn into a pattern, when parts for your operator are no longer manufactured, or when the damage is structural rather than mechanical.
What is the most expensive automatic gate repair?: Operator and control-board work sits at the top of the range, and full operator replacement sits above that — Angi puts a complete replacement at $1,200 to $3,800 installed. Structural repairs to the gate itself, like resetting heaved posts, can exceed both.
Can I get a gate repair price over the phone?: You can get a range, not a number. Describe the symptom and most of the time we can narrow it to a likely component before a truck leaves. The actual figure comes after someone has looked at the gate, and nothing gets replaced until you say yes to it.

Getting a real number for your gate

Describe the symptom on the phone and we can usually narrow it to a likely component before anyone drives out. The estimate is free, and nothing gets replaced until you say yes to it.

Every repair starts with naming the failed component. Call {phone} and describe the symptom.

Same-day service

Gate down today?

We're usually out the same day. The estimate is free, and you'll know what it needs and what it costs before we start.

Call {phone}